Tag Archives: bridges of Portland

Fall colors in Portland, OR

[/caption] The Fall colors are finally starting to dominate the downtown Portland landscape and the weather was sunny and warm. I can’t think of a better way to spend the day than biking along the Willamette river and the many bridges that span the river. One of the best ways to really get a good look of the city is by bicycle. There are miles of paved paths that travel on both the west and east sides of the Willamette river. Most of the bridges also have pedestrian paths that allow walkers, joggers and bikers to safely cross. Normally I walk along the river so I can spend a lot of time photographing the city. However, this time I decided to try something a bit different by traveling as much as I can while photographing several different areas throughout the city. You pretty much have to ditch the tripod and only pack a few lenses but it’s well worth it. There are plenty of free 2 hour parking spots throughout the city which makes it easier to travel by bike. Especially since you can quickly get back to your car before you get a ticket. Biking through the city can be tricky during the early afternoon on a warm sunny fall day but it’s a great opportunity to get people in your photos. This photo was taken just north of the Burnside Bridge with the Ben Franklin building in the background. You can see the rich colors along with some of the still green vegetation lining the river near the city. I like this shot of the wispy cloud almost directly over the top of the building and with the Made in Oregon sign next to it. It almost looks like a giant chimney billowing out smoke from its top. This photo really shows just how much personality Portland has. The combination of several bridges, the Willamette river, vegetation and the buildings create a fantastic atmosphere. To get this shot I was using my Canon T1I Rebel along with my Tokina 12-24 wide-angle lens and the focal length for this photo was at 15mm. I had my UV, warming and CIR-PL filter attached to my lens. Because I was riding my bike, I wasn’t carrying my tripod. The glare was fairly intense since I took this photo at 12:25pm and I took this photos almost due south. I usually just put the sun in the upper left or right of the frame in order to avoid sun spots or too much exposure. However, my warming filter and CIR-PL always eliminates this problem. Again, I can’t stress the importance of using these filters anytime you are taking pictures during full sun. I had the camera in program mode so the shutter speed was at 1/64 second and the F stop was at F-5.6. I set the ISO to 100 and adjusted the white balance to 0. I always make sure to set my camera to the histogram setting so I can quickly review the photo and make immediate adjustments if needed. I highly recommend a bike trip in the city if you really want to get a great opportunity to get some great views of the downtown area.